The detail parameters can be designed according to the customers' requirements.
We can design it according to the customers’ requirements if the customers offer the production line’s parameters as follows:
1.annual output
2.Steel width
3.Steel thickness
4.Fuel
disel Customized Hot Dip Galvanizing Production Line(Steel Strip)
Continuous Annealing Furnace
Below is an example of continuous annealing line with the production of 200 thousand ton, which equipped with double uncoilers, double-layer shear, electrolytic cleaning machine, vertical looper, vertical/horizontal annealing furnace, planishing mill, tension leveller, edge-cutting shear, coiler for trimmings, exit shear and double coilers.
The anneal furnace adopt radiant tube as heating type, with vertical/horizontal furnace, the maximum technological speed is 160m/min,the maximum running speed at exit is 220m/min.
Equipment parameter
A: Raw material
Material:cold rolled low carbon steels
Model: Q215,Q195,SPCC,SPCD
Thickness:0.2~1.2 mm
Width:800~1250 mm
Coil ID:Æ508 mm/Æ610 mm
Coil OD:Æ1100 mm~Æ2100 mm
Coil weight:Max. 25t
1. Both longitude wire and cross wire can be feeded from wire coils automatically.
2. The mesh size is precise and the machine can be set the width and length according to customer's requirement.
3. The production line consists of main welding machine, electrical control cabinet, reparing table, repairing machine, bracket for longitude wires, bobbin machine and bobbins.
This system allow manual control interface in the pickling effect unqualified when artificial intervention, and real-time data recording, the formation of large data, the future through big data analysis, according to the acid concentration and temperature, the shape parameters, automatic formation of reasonable pickling process.
1. track is shared with an enclosed single beam, with a distance of about 32 meters.
2. configuration holder 2 sets, single set of hand load 10T, running speed of 10-20m/min;
3. supporting hand is equipped with vehicle control PLC, frequency converter, wireless communication module, code reader, track locator, RFID recognition system and so on to control the original device, and the protection level of electric control box is IP65.
4. system uses the sliding contact line, the collector supply of the car power supply; all units and the main control system adopts industrial control between wireless Ethernet, implementation of vehicle PLC and ground PLC master data exchange.
up to the customer:
2.1 power tower etc
2.2 street pole
2.3 small parts(bolt etc)
2.4 steel pipe
Acid smoke collection treatment system: with the closed acid house, with water sealed and working piece move in and move out technique to control the acid smoke inside the house, to suck the acid smoke to secondary acid treatment tower by fan, with water spraying and sodium-hydroxide soluble acidimetry to achieve the acid recycle and reach the environment protection requirements.
This system adopts the vertical arm hand type lifting device, compared with the traditional vehicle or electric hoist, with accurate positioning, no shake, can achieve a stable sling hold up and down, to avoid the slings and workpiece fall into the acid pool, and my company independent research and development of the hoisting device, with the PLC automatic control program, can be intelligent the lifting task is adjusted by the process of pickling time recording processing groove, adjust the hand task, reduce the load time, the precise control of the pickling time and automatically enter and put forward into the next process of pickling tank tank.
